{"id":3008,"date":"2026-07-02T17:03:37","date_gmt":"2026-07-02T09:03:37","guid":{"rendered":"https:\/\/panocourt.com\/?p=3008"},"modified":"2026-07-02T17:18:02","modified_gmt":"2026-07-02T09:18:02","slug":"china-padel-court-mejorset-alternative","status":"publish","type":"post","link":"https:\/\/panocourt.com\/ar\/china-padel-court-mejorset-alternative\/","title":{"rendered":"\u0628\u062f\u064a\u0644 \u0645\u0644\u0639\u0628 \u0627\u0644\u0628\u0627\u062f\u0644 \u0645\u0646 \u00abMejorSet\u00bb: \u0647\u0644 \u064a\u0645\u0643\u0646 \u0644\u0645\u0635\u0646\u0639 \u0635\u064a\u0646\u064a \u0644\u0645\u0644\u0639\u0628 \u0627\u0644\u0628\u0627\u062f\u0644 \u0623\u0646 \u064a\u0636\u0627\u0647\u064a \u0627\u0644\u062c\u0648\u062f\u0629 \u0627\u0644\u0625\u0633\u0628\u0627\u0646\u064a\u0629 \u062d\u0642\u064b\u0651\u0627\u061f"},"content":{"rendered":"

You’ve seen MejorSet. You liked what you saw \u2014 the clean corners, the hidden bolts, the way no single screw seems to exist on the surface. Then you got the price. Then you asked around about lead times.<\/p>\n\n\n\n

That’s usually when someone tells you: “There’s a China padel court factory that does the same thing for less.” And your first instinct is probably skepticism. Fair enough. This article isn’t going to ask you to trust anyone. Instead, it’s going to show you exactly what to check \u2014 and how to check it \u2014 before you commit to a single dollar. Before diving in, see our full China vs Spain padel court factory comparison<\/a> \u0648\u0640 top padel court manufacturers in China 2026<\/a>.<\/p>\n\n\n\n

\"China
Pano Court’s automated powder coating line \u2014 AkzoNobel Interpon D2, 80\u2013100 \u00b5m DFT, logged panel by panel.<\/figcaption><\/figure>\n\n\n\n

Are the Raw Materials in a Spanish Padel Court Actually Better Than What a China Padel Court Factory Uses?<\/h2>\n\n\n\n

Short answer: No. The materials are governed by international standards that any factory in any country can buy and certify.<\/strong><\/p>\n\n\n\n

This is the single most important thing buyers misunderstand when comparing padel court Spain manufacturers to Chinese factories<\/a>. The steel MejorSet uses is classified as S355 under the European standard EN 10025. The steel PanoCourt uses is Q355, classified under China’s GB\/T 1591. These two grades are officially equivalent \u2014 same 355 MPa minimum yield strength, same 7.85 g\/cm\u00b3 density, same carbon content ceiling of \u22640.20%.<\/p>\n\n\n\n

The powder coating brands that appear in high-end Spanish court specifications \u2014 AkzoNobel Interpon and Jotun \u2014 both have manufacturing and distribution networks in China. When we order Interpon D2 super-durable polyester for a client’s build, we’re buying from the same product line as any European fabricator. There is no “Spanish-exclusive” formula.<\/p>\n\n\n\n

The glass standard is even clearer. EN 12150-1 is a single international standard for tempered safety glass, recognised by the \u0627\u0644\u0627\u062a\u062d\u0627\u062f \u0627\u0644\u062f\u0648\u0644\u064a \u0644\u0644\u0628\u0627\u062f\u064a\u0644 (FIP)<\/a>. It doesn’t have a Spanish edition and a Chinese edition. A 12 mm tempered panel that carries an EN 12150-1 certificate is the same product, whether it was installed in Madrid or Melbourne.<\/p>\n\n\n\n

\"CNC
CNC laser cutting every steel profile \u2014 consistent tolerances, zero manual marking error, every batch traceable to Mill Test Certificate.<\/figcaption><\/figure>\n\n\n\n
Material<\/th>Spanish Standard (MejorSet)<\/th>Chinese Equivalent (PanoCourt)<\/th>Same?<\/th><\/tr><\/thead>
Structural steel<\/td>S355 (EN 10025), 355 MPa yield<\/td>Q355B\/C (GB\/T 1591), 355 MPa yield<\/td>Yes<\/td><\/tr>
\u0627\u0644\u0637\u0644\u0627\u0621 \u0628\u0627\u0644\u0645\u0633\u062d\u0648\u0642<\/td>AkzoNobel Interpon \/ Jotun, QUALICOAT<\/td>AkzoNobel Interpon \/ Jotun, same product line<\/td>Yes \u2014 same brand<\/td><\/tr>
\u0627\u0644\u0632\u062c\u0627\u062c \u0627\u0644\u0645\u0642\u0633\u0651\u0649<\/td>12 mm, EN 12150-1 certified<\/td>12 mm, EN 12150-1 certified<\/td>Yes \u2014 one global standard<\/td><\/tr>
Welded mesh<\/td>50\u00d750\u00d74 mm, hot-dip galvanized<\/td>50\u00d750\u00d74 mm, hot-dip galvanized, ISO 1461<\/td>Identical spec<\/td><\/tr>
Hardware<\/td>Stainless steel, SS304\/SS316<\/td>SS304 standard \/ SS316 coastal<\/td>Same grades<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

How Do You Actually Verify What a Padel Court Factory in China Is Using?<\/h2>\n\n\n\n

The answer is documentation \u2014 specific documents that exist before production starts, not after.<\/strong><\/p>\n\n\n\n

Here’s what happens in a lot of padel court purchases from China: a buyer gets a brochure, sees the right words (“Q355,” “Interpon,” “EN 12150-1”), places an order, and only finds out the truth when the container arrives. That’s the wrong order of operations. At PanoCourt, we’ve structured our process around one principle: you verify before you pay, not after.<\/strong> Understanding which type of China padel court supplier you’re dealing with<\/a> is the first step \u2014 and our \u062f\u0644\u064a\u0644 \u0627\u0644\u0645\u0634\u062a\u0631\u064a \u0644\u0645\u0635\u0627\u0646\u0639 \u0645\u0644\u0627\u0639\u0628 \u0627\u0644\u0628\u0627\u062f\u0644 \u0641\u064a \u0627\u0644\u0635\u064a\u0646<\/a> covers the full screening process.<\/p>\n\n\n\n

1. Request the Mill Test Certificate Before Cutting Starts<\/h3>\n\n\n\n

A Mill Test Certificate (MTC) is issued by the steel mill \u2014 not the fabricator. It lists the actual chemical composition and mechanical test results for the specific batch of steel used in your order. Ask for it with the batch number that matches your production run. If a factory can’t provide this, they’re not the one controlling the material. In our independent steel pipe test (reference: TST2024S00056), our Q355 tube came back at 476 MPa tensile strength and 387 MPa yield \u2014 both above the 355 MPa minimum.<\/p>\n\n\n\n

2. Book a Third-Party Inspection \u2014 At Any Stage You Choose<\/h3>\n\n\n\n

We welcome SGS, Bureau Veritas, T\u00dcV, and Intertek at any production stage. You pick the agency. You pick the timing. The inspector walks the floor, checks the material certificates against the actual stock, measures dry-film thickness with a gauge, and photographs the welds before they’re ground smooth. One of our European clients used Bureau Veritas for a pre-shipment inspection on a five-court project destined for a club in France. The inspector checked 27 individual DFT readings across six panels \u2014 all logged between 84 and 97 microns.<\/p>\n\n\n\n

3. Send Us Your Sample or Specification Sheet \u2014 We Build to It<\/h3>\n\n\n\n

Several clients have sent us physical hardware samples \u2014 a hinge they preferred, a lock mechanism from a local supplier, a powder colour swatch \u2014 and asked us to match or incorporate it. We design around the sample, render the joint detail, and send back a confirmation drawing. Production doesn’t start until the client signs off on that drawing. “Concealed fixings” means different things to different factories. When a client sends us a detail photo from a MejorSet court and says “I want this joint,” we produce a cross-section drawing showing exactly how our hidden bolt and internal connection plate replicates that detail.<\/p>\n\n\n\n

\"Robotic
Robotic welding station \u2014 repeatable, consistent beads, welds ground smooth with zero visible defects on the finished court surface.<\/figcaption><\/figure>\n\n\n\n

4. Watch the Factory \u2014 Live or Pre-Recorded<\/h3>\n\n\n\n

We run video factory tours on request, and for clients who want real-time visibility, we’ll schedule a live walkthrough over video call. You can see the steel stock, the laser cutter, the robotic welding station, the galvanizing bath, the powder coating line, and the glass tempering room. For a multi-court order, we offer weekly video updates shot at each production node.<\/p>\n\n\n\n

5. Follow Your Court Through Every Production Stage<\/h3>\n\n\n\n

We now photograph and timestamp every court at six stages: raw material intake \u2192 laser cutting \u2192 robotic welding \u2192 hot-dip galvanizing \u2192 powder coating \u2192 pre-shipment assembly check. The photos go into a shared folder with the client’s project manager.<\/p>\n\n\n\n

What Does PanoCourt’s Production Quality Actually Look Like on a Real Project?<\/h2>\n\n\n\n

The France indoor club project is probably our clearest reference for buyers who want MejorSet-level aesthetics.<\/strong><\/p>\n\n\n\n

The client \u2014 a premium padel club operator in France \u2014 came to us after receiving quotes from two Spanish suppliers and one Italian one. Their brief was specific: they wanted a Super Full-Panoramic court with no visible fixings on the glass, flush mitred corners, and internal cable routing. The powder colour was a custom RAL that their interior designer had specified. Lead time was a hard constraint: 14 weeks to installation.<\/p>\n\n\n\n

The client sent us a detail photo from a MejorSet reference court \u2014 specifically the corner junction where the glass meets the frame. We produced a cross-section CAD drawing showing our hidden clamp system, the 5 mm neoprene pad seat, and the polymer edge gasket at every fixing point. The client’s structural engineer reviewed the drawing and requested one change \u2014 a slightly wider internal connection plate on the upper ring joint. We revised, re-rendered, and got sign-off within three days.<\/p>\n\n\n\n

Steel arrived with MTC on day four. The client’s designated inspector (a local BV contact) was on-site at the factory on day eleven. Galvanizing certificate issued \u2014 zinc coat measured at 344 g\/m\u00b2 against the ISO 1461 minimum of 275 g\/m\u00b2. Powder coating used AkzoNobel Interpon D2. Post-coating DFT readings ranged from 86 to 99 microns. The courts arrived in France in week ten. Installation was completed in week thirteen \u2014 one week ahead of the hard deadline \u2014 using our pre-labelled component system, which reduced on-site labour by an estimated 35%.<\/p>\n\n\n\n

Why Is a Spain-Built Padel Court So Much More Expensive Than an Equivalent China Padel Court?<\/h2>\n\n\n\n

The price gap is real, but it’s not coming from the materials \u2014 it’s coming from the cost structure around the materials.<\/strong><\/p>\n\n\n\n

For a full breakdown of padel court costs including installation and ROI<\/a>, see our dedicated guide. On identical premium specification, here’s how the delivered cost breaks down:<\/p>\n\n\n\n

Cost Component<\/th>Spanish-Built Court (MejorSet tier)<\/th>PanoCourt (Same Specification)<\/th><\/tr><\/thead>
Raw materials (same grades & brands)<\/td>~28% of total price<\/td>~48% of total price<\/td><\/tr>
Labour & fabrication<\/td>~34%<\/td>~22%<\/td><\/tr>
Brand, certification & margin<\/td>~24%<\/td>~16%<\/td><\/tr>
Overhead & export logistics<\/td>~14%<\/td>~14%<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

EU labour rates are 3\u20135\u00d7 higher than Chinese rates. Brand amortisation and multi-tier distribution add another layer. PanoCourt competes on overhead \u2014 not on material grade. Specifying genuine Interpon powder, EN-certified glass, and SS316 hardware costs us the same per unit as it costs any manufacturer. The 30\u201340% price saving goes straight back to the buyer.<\/p>\n\n\n\n

Is the Lead Time from a China Padel Court Factory Really That Much Faster?<\/h2>\n\n\n\n

Yes. Our standard production lead time is 30 days. MejorSet-tier Spanish factories typically run 16\u201324 weeks.<\/strong><\/p>\n\n\n\n

This matters more than people factor in at the buying stage. A club project with a fixed opening date, a lease that starts on a specific month, or a seasonal window for outdoor installation can’t absorb a six-month lead time with no acceleration option. According to \u062c\u0648\u0644\u0629 \u0627\u0644\u0628\u0627\u062f\u0644 \u0627\u0644\u0639\u0627\u0644\u0645\u064a\u0629<\/a> figures, the sport is adding millions of new players each year \u2014 demand for club capacity is outpacing supply in most markets. Speed to open matters commercially.<\/p>\n\n\n\n

\u0627\u0644\u0639\u0627\u0645\u0644<\/th>MejorSet \/ Spanish Factory<\/th>PanoCourt (China Padel Court Factory)<\/th><\/tr><\/thead>
Standard lead time<\/td>16\u201324 weeks<\/td>30 days<\/td><\/tr>
Production capacity<\/td>\u0645\u062d\u062f\u0648\u062f<\/td>500+ sets\/year<\/td><\/tr>
Container efficiency<\/td>\u2014<\/td>2 panoramic courts per 40HQ<\/td><\/tr>
On-site labour saving<\/td>\u2014<\/td>30\u201340% with pre-labelled components<\/td><\/tr>
Third-party inspection<\/td>Possible<\/td>Standard \u2014 buyer selects agency<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

How Do You Work With PanoCourt From First Enquiry to Installed Court?<\/h2>\n\n\n\n

Six milestones, tied to six payment releases \u2014 you approve each stage before the next one starts.<\/strong><\/p>\n\n\n\n