A portable padel court is a fully functional padel court built with modular steel or aluminum framing systems that can be assembled and disassembled without ground excavation or permanent foundation work. Unlike fixed courts that require concrete foundations and cannot be relocated, a portable court can be installed in 1–3 days, moved to a new site, and reused multiple times.

The key structural difference lies in the base connection system: portable courts use bolt-flange or anchor-plate footings instead of embedded posts. The playing surface, glass panels, fencing, and lighting can all be demounted and repackaged. This makes portable courts roughly 40–60% faster to install than permanent structures and eliminates civil engineering costs entirely.

PanoCourt manufactures portable padel courts from its factory in China with a standardized modular design that ships flat-pack in standard 20ft or 40ft containers, reducing freight costs and simplifying customs clearance for international buyers.

Portable padel courts can be installed on any flat, load-bearing surface, including concrete slabs, asphalt, compacted gravel, rooftops, sports halls, parking lots, event grounds, and indoor arenas. The installation footprint for a standard single court is approximately 20m × 10m, requiring no drainage works or foundation permits in most jurisdictions.

PanoCourt has supplied portable courts to hospitality and events clients across Europe, the Middle East, and Southeast Asia, providing installation drawings and anchor engineering specs adapted to each surface type.

A standard portable padel court (20m × 10m panoramic or classic configuration) typically requires 2–4 workers and 1–2 days for full assembly, depending on surface conditions and crew experience. Disassembly takes a similar amount of time.

On repeat installations, experienced crews can complete assembly within 8–10 hours. PanoCourt’s modular system uses pre-numbered components with color-coded connection points, reducing assembly errors and cutting setup time by approximately 30% compared to generic modular court systems.

Portable padel courts manufactured to professional standards must withstand wind loads of up to 120 km/h and glass panel impact forces compliant with EN 12600 safety glazing standards. The steel frame is typically hot-dip galvanized and engineered to sustain dynamic player loads without deformation.

PanoCourt’s portable court frames use Q355B structural steel with a minimum yield strength of 355 MPa, meeting the load requirements for both indoor and outdoor use. Courts are anchored via expansion bolts or counterweight base plates; for rooftop or soft-surface installations, custom anchor designs are provided as part of the project package.

Yes. The International Padel Federation (FIP) defines court dimensions as 20m (length) × 10m (width) × 6m (height clearance), with specific glass panel thickness, fencing mesh specifications, and surface friction coefficients. Portable courts built to these specifications are fully competition-eligible.PanoCourt designs its portable courts to FIP dimensional and material standards by default, with optional upgrades including FIP-approved artificial turf surfaces and certified LED lighting systems.